LURCH - The autonomous wheelchair

LURCH in DEI exploration

L.U.R.C.H. is the acronym of "Let Unleashed Robots Crawl the House". Click here for a brief description of the project, taken from the AIRLab website.

LURCH is an extended version of an electric commercial wheelchair (Rabbit, by OttoBock) equipped by

1. Interface circuit for digital drive via radio serial link (XBee modules)
2. onboard computer (mother board Via Mini ITX), powered by the wheelchair batteries
3. Monitor touchscreen
4. Two laser scanners Hokuyo URG 04LX
5. Colour camera FireI400 (resolution 640*480)
6. Accelerometer, gyroscope, magnetomeer XSens MTi.

Main goals of the LURCH project are:

1. Add sensor and robotics functionality to the powered wheelchair.
2. Add various command interface, such as Joypad wireless, speech command, Brain Computer Interface.
3. Semiautonomous navigation with collision and obstacle avoidance.
4. Autonomous navigation by path planning and localization.

Function actually provided by LURCH:

1. Drive by original Joystick or Joypad Logitech RumblePad2 Wireless.
2. Obstacle identification using planar scanner laser.
3. Collision and Obstacle Avoidance basic behaviours.
4. Indoor localization by Fiducial Marker System
5. Path Planning and basic autonomous navigation.

Available Doumentation

Il circuito di comando che permette di interfacciare la carrozzina con un computer è illustrato dettagliatamente File:LurchCircuitDocument.pdf e le modifiche da effettuare sul joystick della carrozzina sono spiegate passo passo File:LurchCircuitJoystick.pdf. Il codice per il microprocessore PIC del circuito, lo schema del circuito e dello stampato (progettato in Eagle) sono disponibili in (BROKEN LINK)LurchCircuitProject.zip. ATTENZIONE: alcune modifiche sono state effettuate posteriormente alla stesura di questa documentazione. La documentazione aggiornata sarà disponibile presto.

LURCH YouTube Video

• External link

Persone coinvolte nel progetto

Prof. Andrea Bonarini

Prof. Matteo Matteucci

Ing. Davide Migliore

Ing. Giulio Fontana

Marco Dalli (Tesista)

Simone Ceriani (Tesista)

Laboratory work and risk analysis

Laboratory work for this project is mainly performed at AIRLab/Lambrate. It includes some mechanical work and electrical and electronic activity. Potentially risky activities are the following:

• Use of mechanical tools. Standard safety measures described in Safety norms will be followed.
• Use of soldering iron. Standard safety measures described in Safety norms will be followed.
• Transportation of heavy loads (e.g. robots). Standard safety measures described in Safety norms will be followed.
• Robot testing. Standard safety measures described in Safety norms will be followed.