Making rubber models

From AIRWiki
Jump to: navigation, search

A rubber model is useful when you are tring to create a prototype of an object that you are planning to build. This is the object that will be created in this section Wd1.jpg

To build a model you need three main steps:

Having/Building the original object you want to replicate (POSITIVE)

The material with which you bel the positive can be wood, clay or wax.

Remember that whan you are using something different from wax, you have to apply a release agent in order to pull out the model from the stamp

P6221680.JPG

Build the stamp that will used to replicate many times the object (NEGATIVE)

Now there is the interesting part. To build the stamp and the original object i have used some interesting products that can be found at smooth-on[1]. You can buy from the unique sellers in italy in Lissone:

Ferba, S.R.L. Via Goito 23 20035 Lissone Milano, Italia Tel: 390 392 143 022 Fax: 390 394 655 055 E-mail: erbadaniela(at)ferba(dot)it

The materials you can chose are very wide: You can have solid NEGATIVE and Rubber NEGATIVE or viceversa. The first one is my chioce since i need a rubber object.


I have first created a container for the model

P6231682.JPG

Then i used Feather Lite that is a heavily filled low-density urethane casting resin

P6231683.JPG

First you have to roughly mix each compound separately and then you can mix together the two compound 1:1 and put htem into the stamp

P6231684.JPG

In 8 minutest you will not be able to modify the form of the stamp an in 2h you can demold the stamp. Thi is the result:

P6231685.JPG


Create a copy of the original object

Now tha you have the stamp you can build as many copy of the original product that you want.

I have used another product of smooth-on PMC-780 that is a premium performance urethane rubber. You have to mix the two compound A and B by 2A:1B. The color of the rubber is transparent/dark, so if you want to give the object a color you have also to buy the color.

I want also to stress you that is very important to hae a release agent in order to take away the object from the stamp. If it is the first time it willbe better to buy one of it from the same company.

P6291718.JPG


I have also placed some metal inside the rubber in order to be able to curve it.

At the end this is the resultl

P6291719.JPG