Roomba - vacuuming robots

From AIRWiki
Revision as of 12:02, 16 June 2010 by PaoloBelluco (Talk | contribs) (Schedule)

Jump to: navigation, search

Roomba is a low-cost robot produced by iRobot. It is intended to be a commercial cleaning robot, however with little to no modification it can become a powerful educational/hobbyist robotics platform.

Roomba 560

Sensors & Actuators

The Roomba comes with these basic sensors:

  1. Four IR based cliff sensors
  2. Two bump sensors
  3. One wall sensor
  4. A top mounted IR sensor. Used by Virtual Walls, Docking Station, and Remote Control
  5. One Dirt Detector (acoustic impact). Some Roombas have two.

The Roomba is sold commercially as a mobile vacuum cleaner, thus it also has these actuators:

  1. Two wheels drive with differential drive
  2. One main brush motor
  3. A side brush motor
  4. A Vacuum motor.

Communication protocol

The Roomba proprietary Serial Command Interface is available here: Roomba SCI.

Hacking the Roomba

Make your own Roomba-serial, Roomba-USB or Roomba-bluetooth dongle.


If you need to move a Roomba from the lab, you should first ask to Andrea Bonarini, and then fill in the table below.

ID Test Notes Where/Who Project
#1 OK AIRLab
#2 OK AIRLab
#3 Collaudato (Matteo) AIRLab
#4 OK + Batteria roomba #6 Paolo Belluco
#5 KO (bumper) AIRLab
#6 KO (bumper) AIRLab
#7 KO (alimentazione) AIRLab
#8 Collaudato (Simone) AIRLab
#9 Collaudato (Martino) USB cable and white battery charger borrowed Andrea Scalise, Niccolò Tenti Roomba project

See also

Disassembling a Roomba 560

External links

Roomba Hacking Forum

iRobot USA