Difference between revisions of "STM32 tutorial"
|Line 62:||Line 62:|
==== OpenOCD ====
==== OpenOCD ====
Revision as of 14:13, 27 April 2010
---Work in progress---
STM32 is an ARM Cortex-M3 microcontroller built from ST. It combines a modern 32 bit architecture, high performances and low cost, making it a good choice for many applications.
In AIRLab there are some STM32 based boards to learn how to work with this kind of microcontrollers, and some projects have been developed on this architecture.
To be able to work with STM32 microcontrollers you will need:
- an hardware board with the MCU and a JTAG connector to program it
- a JTAG adapter
- a toolchain to compile ARM executables on your computer
- OpenOCD to write the executable on the MCU
In the AIRLab there are two ET-STM32 Stamp Module, low-cost plug-in modules with a STM32F103RET6 MCU on board. They include also a crystal oscillator, a MAX232 to communicate via serial port and the circuitry needed to upload the firmware via a bootloader, that is preloaded on the microcontroller.
To start working with STM32 and it's peripherals there is a custom built demo board for the STM32 plug-in module that includes some LEDS, some buttons, two trimmers for ADC conversions, a 7-segment display, power supply and connections for RS232, SPI, I2C, CAN and USB interface.
ST board (IMU)
In the AIRLab there are four JTAG - USB adapter to program and debug ARM microcontrollers. Those adapters are ARM-USB-TINY from Olimex, and there are drivers for Windows, Linux and OSX.
In order to build executables for ARM microcontrollers you need a compiler (ASM, C or C++) and a linker specifically built for ARM targets. There are some complete solutions that integrate the compiler and linker with a graphical source editor and a debugger, but most of them have commercial licenses.
Here you can find a list of Integrated Development Environments for STM32 microcontrollers: http://www.st.com/mcu/inchtml-pages-ide.html
IAR and KEIL are the most common in industrial applications, but they are quite expensive (more than 2000 USD). Crosswork's CrossStudio is an IDE that runs on Windows, Linux and OSX and works also with some cheap JTAG adapters (including Olimex's ARM-USB-TINY) and it's price starts from 150 USD. We have evaluated it and the first impressions are really good.
Some of the IDEs are available for free. Currently, they are:
- Raisonance RIDE7, but it works only with Raisonance's programmer, that costs money
- Atollic TrueStudio, that is an eclipse based IDE with GCC built for ARM targets (runs only on windows)
Some people from ST are working on an open source toolchain, that can be downloaded here: http://www.danielecaltabiano.com/wwme/ST-ARM_toolchain/st-arm.htm . It is in alpha stage, but it is possible to build valid executables.
Another solution is to build a custom toolchain to make ARM executables (instructions will be posted here).
Codesourcery has developed an optimized toolchain for ARM processors that is open source (their IDE on the contrary has a commercial license) that runs on Windows and Linux (and there is a source packages, so it is possible to build it for OSX too). Here there are binary installers for Windows and Linux as well as the source tarball: http://www.codesourcery.com/sgpp/lite/arm/ .
To install from binary packages, just download the one you need and run it (if you have downloaded the installer package) or extract it (if you have downloaded the tarball). To install from sources, you'll need to extract them, enter the source directory, and then run ./configure && make && make install.