Browse wiki

Jump to: navigation, search
R2P IMU firmware development
PrjCFUMax 20  +
PrjCFUMin 2  +
PrjDescription We have developed the electronics of an In We have developed the electronics of an Inertial Measurement Unit based on an ARM microcontroller to be integrated on an autonomous embedded aerial platform. The IMU has already some attitude heading reference system (AHRS) code implemented, but we are interested in: *implementing embedded algorithms for the estimation of the IMU attitude to be compared with the actual one (e.g., Kalman filter, DCM, Madgwick, etc.) *developing a, easy to use, procedure for the calibration of IMU parameters *making a comparison with commercial units using a robot arm as testbed *validate the accuracy of the IMU on a flying platform *integrate the measurements from a GPS to reduce drift and provide accurate positiong (this will make it definitely a MS thesis) '''Material''' *electronic board and eclipse based C development toolkit for ARM processors *papers describing the algorithms we are interested in implementing '''Expected outcome:''' *few different AHRS algorithms with comparative results *user-friendly procedure to calibrate the IMU *a sistem which integrated IMU and GPS to provide accurate positioning '''Required skills or skills to be acquired:''' *C programming on ARM microcontroller *background on kalman filtering and attitude estimation n kalman filtering and attitude estimation
PrjImage Image:R2P_IMU.png  +
PrjLevel Bachelor of Science + , Master of Science +
PrjResArea Robotics +
PrjResTopic Robot development +
PrjStarts 1 January 2015  +
PrjStatus Closed  +
PrjStudMax 2  +
PrjStudMin 1  +
PrjTitle Embedded Inertial Measurement Unit for Unmanned Aerial Vehihcles  +
PrjTutor User:AndreaBonarini + , User:MartinoMigliavacca + , User:MatteoMatteucci +
PrjType Course + , Thesis +
Categories ProjectProposal  +
Modification dateThis property is a special property in this wiki. 31 December 2014 15:25:57  +
hide properties that link here 
  No properties link to this page.
 

 

Enter the name of the page to start browsing from.