Browse wiki

Jump to: navigation, search
Self calibration of multiple odometric sensors
PrjCFUMax 20  +
PrjCFUMin 20  +
PrjDescription An odometric sensor measures the path foll An odometric sensor measures the path followed by a robot in an incremental way (e.g., wheel mounted encoders, visual odometry, scan matching based odometry, etc.) . Having several odometry sensors mounted on the same platform can significantly improve the accuracy and robustness of the overall system but requires proper calibration of relative positioning and possible biases. We are interested in the development of techniques for the self calibration of a multi sensor based odometry sensor. These techniques could be inspired by classical non-linear optimization techniques used in the hand and eye problem but they could use techniques from Simultaneous Localization and Mapping. According to the setup, some information on the real position of the system may exists (i.e., external tracking system or GPS); the approach should be able to use this information as well. '''Material:''' *datasets with real data *a few odometric system implementations *C++ libraries for non linear optimization '''Expected outcome:''' *software for the self calibration of a set of odometry systems mounted on the same robot '''Required skills or skills to be acquired:''' *C++ programming under Linux acquired:''' *C++ programming under Linux
PrjImage Image:HandEye.jpg  +
PrjLevel Master of Science +
PrjResArea Robotics +
PrjResTopic None +
PrjStarts 1 April 2012  +
PrjStatus Closed  +
PrjStudMax 2  +
PrjStudMin 1  +
PrjTitle Self calibration of multiple odometric sensors mounted on the same platform  +
PrjTutor User:MatteoMatteucci + , User:SimoneCeriani + , User:DavideCucci +
PrjType Thesis +
Categories ProjectProposal  +
Modification dateThis property is a special property in this wiki. 21 December 2014 23:43:05  +
hide properties that link here 
  No properties link to this page.
 

 

Enter the name of the page to start browsing from.